Valves for Water Treatment & Desalination — Cebu

Yes. Vajra Industrial Solutions supplies Concentric Butterfly Valve, Resilient-Seated Gate Valve, Swing Check Valve, Diaphragm Valve (Rubber-Lined) for water treatment & desalination applications in Cebu, Central Visayas. Cebu City is the Philippines' second-largest industrial centre and the hub for the Visayas region — KEPCO SPC Power Corporation's 200 MW coal-fired Cebu coal plant and VECO's expanding power distribution network require ASME-rated gate and globe valves for steam and cooling water systems; the Mactan Shipbuilding and Ship Repair complex sources seawater-resistant duplex stainless steel and bronze butterfly valves in large volumes, while the Mactan Export Processing Zone (MEPZ) hosting Mitsui, Furukawa, and Hitachi electronics plants demands high-purity SS 316L ball valves and pneumatic actuated diaphragm valves for DI water and clean process utility systems. We offer export documentation and delivery to Cebu in 7–14 business days with full documentation and third-party inspection.

For water treatment & desalination in Cebu, the applicable standards are: EN 593 (Butterfly valves), AWWA C504 / C509 / C515, ISO 9001:2015, IS 780 / IS 14846, BS EN 1171 (Cast iron gate valves), WRAS / NSF 61 (Drinking water contact). All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

Standard stock sizes: export documentation and delivery to Cebu in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

For water treatment in India, butterfly valves are specified per IS 13095 (Indian Standard for butterfly valves for water supply and sewerage), EN 593 (European standard), or AWWA C504. IS 13095 is the most common for domestic municipal projects. The valve body is typically ductile iron (GGG-50 per ISO 1083 or IS 1865) with EPDM seat. For export-oriented projects or international standards (World Bank, JICA-funded), EN 593 or AWWA C504 is specified.

RO desalination plants use several valve types: High-pressure butterfly valves or ball valves (in SS 316 or Duplex) for RO membrane train isolation; energy recovery devices (ERD) require high-cycle valves with precise control; brine reject lines use SS 316 due to high chloride concentration; pre-treatment (clarification, filtration) uses ductile iron butterfly valves. All valves in contact with potable water must comply with NSF 61 or equivalent.