Valves for LNG & Cryogenic Service — Tunis

Yes. Vajra Industrial Solutions supplies Cryogenic Ball Valve (Extended Bonnet), Cryogenic Gate Valve (Extended Bonnet), Cryogenic Globe Valve (Extended Bonnet), Cryogenic Check Valve for lng & cryogenic service applications in Tunis, Tunis. Tunisia's Sfax-Gabes phosphate and phosphoric acid corridor (operated by Groupe Chimique Tunisien) is one of Africa's largest chemical industrial complexes, requiring corrosion-resistant PVDF and rubber-lined ball valves and large-bore SS 316 butterfly valves for phosphoric acid service; ENI and Equinor offshore oil and gas fields in the Gulf of Tunis drive demand for API 6D certified subsea-rated valves, while the national water utility SONEDE's infrastructure rehabilitation programme sources large quantities of resilient-seated gate and butterfly valves for potable water networks. We offer export documentation and delivery to Tunis in 7–14 business days with full documentation and third-party inspection.

For lng & cryogenic service in Tunis, the applicable standards are: BS 6364 (Cryogenic valves), ASME B16.34 Annex F, API 6D, EN 13942, ASTM A350 LF2 / LF3, ASTM A182 F316L, MSS SP-134. All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

Standard stock sizes: export documentation and delivery to Tunis in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

An extended bonnet (also called a top-entry or long-bonnet valve) has an elongated bonnet section that moves the stem packing away from the extremely cold process fluid. This prevents the packing material from being exposed to cryogenic temperature (where it would lose elasticity and leak), and prevents atmospheric moisture from freezing around the packing gland. The extension length is calculated based on the process temperature and the acceptable minimum packing temperature.

For LNG (−162°C) and liquid nitrogen (−196°C): ASTM A351 CF8M or CF3M (cast SS 316/316L) and ASTM A182 F316L (forged). For liquid CO₂ and −46°C service: ASTM A350 LF2 (forged low-temperature carbon steel), Charpy impact tested at −46°C. Standard A216 WCB carbon steel must never be used in cryogenic service below −29°C.