Valves for Water Treatment & Desalination — Tunis

Yes. Vajra Industrial Solutions supplies Concentric Butterfly Valve, Resilient-Seated Gate Valve, Swing Check Valve, Diaphragm Valve (Rubber-Lined) for water treatment & desalination applications in Tunis, Tunis. Tunisia's Sfax-Gabes phosphate and phosphoric acid corridor (operated by Groupe Chimique Tunisien) is one of Africa's largest chemical industrial complexes, requiring corrosion-resistant PVDF and rubber-lined ball valves and large-bore SS 316 butterfly valves for phosphoric acid service; ENI and Equinor offshore oil and gas fields in the Gulf of Tunis drive demand for API 6D certified subsea-rated valves, while the national water utility SONEDE's infrastructure rehabilitation programme sources large quantities of resilient-seated gate and butterfly valves for potable water networks. We offer export documentation and delivery to Tunis in 7–14 business days with full documentation and third-party inspection.

For water treatment & desalination in Tunis, the applicable standards are: EN 593 (Butterfly valves), AWWA C504 / C509 / C515, ISO 9001:2015, IS 780 / IS 14846, BS EN 1171 (Cast iron gate valves), WRAS / NSF 61 (Drinking water contact). All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

Standard stock sizes: export documentation and delivery to Tunis in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

For water treatment in India, butterfly valves are specified per IS 13095 (Indian Standard for butterfly valves for water supply and sewerage), EN 593 (European standard), or AWWA C504. IS 13095 is the most common for domestic municipal projects. The valve body is typically ductile iron (GGG-50 per ISO 1083 or IS 1865) with EPDM seat. For export-oriented projects or international standards (World Bank, JICA-funded), EN 593 or AWWA C504 is specified.

RO desalination plants use several valve types: High-pressure butterfly valves or ball valves (in SS 316 or Duplex) for RO membrane train isolation; energy recovery devices (ERD) require high-cycle valves with precise control; brine reject lines use SS 316 due to high chloride concentration; pre-treatment (clarification, filtration) uses ductile iron butterfly valves. All valves in contact with potable water must comply with NSF 61 or equivalent.