Topic Hub

hydrostatic test

4 in-depth engineering guides on hydrostatic test — specification, selection, testing and procurement.

Everything on hydrostatic test

Vajra's engineering team has published 4 technical guides covering hydrostatic test for industrial valve selection, specification, testing and procurement. Browse the full set below.

Gate Valve Installation Guide - Step-by-Step Procedures, Orientation and Best Practices

Correct gate valve installation is critical to valve performance and service life. This step-by-step guide covers pre-installation inspection, orientation requirements, flange bolt tightening sequence, hydrostatic testing, and commissioning best practices for gate valves in industrial piping systems.

2026-05-237

Industrial Valve Hydrostatic Testing Procedures - API 598, ISO 5208 & EN 12266

Factory Acceptance Testing (FAT) of industrial valves involves shell pressure testing and seat leakage testing per API 598, ISO 5208, or EN 12266. Understanding the test pressures, durations, and acceptance criteria ensures you specify the right tests and interpret results correctly.

2026-05-228

Valve Testing and Inspection: API 598, ISO 5208, Hydrostatic & Seat Tests

Every industrial valve must pass mandatory pressure tests before despatch - but the test pressures, durations, and acceptance criteria differ significantly between API 598 and ISO 5208. This guide explains hydrostatic shell tests, seat leakage tests, backseat tests, TPI (third-party inspection) requirements, and the full documentation package expected for critical service valves.

2026-05-178

Valve Testing and Inspection Standards: API 598, ISO 5208, and BS 6755

Every industrial valve must be pressure-tested before shipment to verify structural integrity and seat leakage. API 598, ISO 5208, and BS 6755 define the test pressures, durations, and acceptance criteria that differentiate a certified valve from a questionable one.

2026-04-1010