Viton (FKM)
Fluoroelastomer rubber with excellent resistance to hydrocarbons, fuels, solvents, and elevated temperatures (-20 degrees C to +200 degrees C, short excursions to 250 degrees C). Common for valve O-rings and seats in oil & gas, chemical, and refinery service. Not suitable for steam, hot water, or ketones. Trade name: Viton (Chemours).
Related Products
Frequently Asked Questions
What is Viton (FKM) used for in industrial valves?
Fluoroelastomer rubber with excellent resistance to hydrocarbons, fuels, solvents, and elevated temperatures (-20 degrees C to +200 degrees C, short excursions to 250 degrees C). Common for valve O-rings and seats in oil & gas, chemical, and refinery service. Not suitable for steam, hot water, or ketones. Trade name: Viton (Chemours).
When should I specify Viton (FKM) for valve body or trim?
Viton (FKM) is specified when the process fluid, temperature, or pressure requirements exceed what standard carbon steel (A216 WCB) or austenitic stainless steel (A351 CF8M) can handle. Material selection must consider corrosion rates, maximum and minimum design temperatures, and compliance with NACE MR0175 for sour service. Vajra Industrial Solutions can supply valves in Viton (FKM) with full mill certificates.
Is Viton (FKM) compatible with sour (H2S) service per NACE MR0175?
Material qualification for sour service (NACE MR0175 / ISO 15156) depends on the hardness limits, heat treatment condition, and UNS designation of the specific alloy. For H2S-containing service, the valve material order and PMI (positive material identification) must be verified against the applicable NACE material group. Contact Vajra Industrial Solutions for material recommendations specific to your H2S partial pressure and chloride conditions.
Need a Quote?
API 6D certified valves. Ships to 357+ cities worldwide. 24h response.
Request QuoteContact EngineerAll Categories
Related Troubleshooting
All troubleshooting guides →Technical Support
Have a Technical Question?
Our valve engineers can help specify the right valve for your application. Full project documentation available: MTCs, test reports, dimensional inspection, and third-party inspection coordination.