Valves for Fire Protection Systems - Bontang

Name: Vajra Industrial Solutions
Address: 3rd Floor, 348, Aristo Complex, Opp. Sanghani Skyz, Navrachna University Road, Bhayali TP-2, Vadodara, Gujarat, 391410, IN
Telephone: +91-9979774557
Price range: $$

FM/UL-listed OS&Y gate valves and butterfly valves for sprinkler and fire suppression systems, deluge valves for foam-water systems, and fire hydrant main isolation valves per NFPA 13 and IS 15105.

NFPA 13 (Sprinkler Systems)IS 15105 (India Fire Valve)UL 262 / FM 1210 (Gate Valves)UL 668 / FM 1112 (Butterfly Valves)EN 1074-6

Get a Quote +91 9979774557 WhatsApp Quote

API 6D Certified

ASME B16.34

ISO 9001:2015

24h Quote

Fire Protection Systems Valves - Available in Bontang

OS&Y Gate Valve (FM/UL)

Class 150 / PN 16

Sprinkler system riser isolation - OS&Y design provides visual open/close indication; tamper-indicating; UL 262 listed

Materials: A216 WCB body; SS316 stem (outside screw visible = open); ductile iron variants for lower cost · Standards: UL 262, FM 1210, NFPA 13, IS 15105

View OS&Y Gate Valve (FM/UL) options for Bontang →

Butterfly Valve (Supervisory Switch)

Class 150 / PN 16

Fire water main and zone valves - large bore, tamper-switch for alarm panel supervisory signal; FM approved

Materials: WCB body; ductile iron or SS316 disc; EPDM seat; integral supervisory tamper switch · Standards: UL 668, FM 1112, NFPA 13, AWWA C504

View Butterfly Valve (Supervisory Switch) options for Bontang →

Deluge Valve

Class 150 / PN 16

Automatic water/foam-water release on fire detection signal - used for process plant protection, tank farms, hangar protection

Materials: WCB or ductile iron body; stainless steel trim; EPDM diaphragm or clapper · Standards: UL 260, FM 1020, NFPA 15 (Water Spray), IS 15105

View Deluge Valve options for Bontang →

Check Valve (Fire Water)

Class 150 / PN 16

Fire water pump discharge and riser back-flow prevention - prevents back-syphoning of contaminated water into potable mains

Materials: WCB or ductile iron; rubber seat; SS316 hinge pin · Standards: UL 312, AWWA C508, NFPA 13

View Check Valve (Fire Water) options for Bontang →

Fire Protection Systems Industry in Bontang

LNG Liquefaction (PT Badak NGL - Bontang LNG plant)Fertiliser & Ammonia/Urea (Pupuk Kalimantan Timur)Methanol (Kaltim Methanol Industri)Gas ProcessingMarine & Export Terminals

Critical Valve Requirements

FM Global or UL listing mandatory for all valves on automatic sprinkler systems (NFPA 13 Clause 6.1) - unlisted valves are not accepted by insurance underwriters

OS&Y (Outside Screw and Yoke) design mandatory for sprinkler system control valves - the screw position provides immediate visual indication; alternatively, post-indicator or wall-indicator valve types are used outdoors

Supervisory tamper switch mandatory for all fire system valves - connected to fire alarm panel to alert when valve is partially or fully closed

No pressure drop - full-bore gate valves only; no globe valves on sprinkler mains (excessive pressure drop reduces sprinkler design density)

IS 15105 compliance for Indian projects - Indian standard for fire fighting valves; requires BIS certification for some valve types

Firewater main valves must be car-sealed open (CSO) or locked open - cannot rely on procedural controls alone

Why Bontang's LNG Liquefaction (PT Badak NGL - Bontang LNG plant) Sector Needs Fire Protection Systems Valves

Bontang in East Kalimantan is one of Indonesia's most important process-industry hubs, home to the PT Badak NGL liquefaction complex, the Pupuk Kalimantan Timur ammonia-urea fertiliser plants, and the Kaltim Methanol Industri facility, all fed by regional offshore gas; cryogenic LNG, ammonia, methanol, and gas-processing service calls for a demanding valve portfolio - cryogenic ball, gate, and globe valves in A352 LCC and A182 F316 with extended bonnets for LNG and boil-off duty, API 6D ball and gate valves in A216 WCB for feed-gas and product lines, stainless and special-alloy valves for ammonia and methanol streams, severe-service control valves, and API 526 safety-relief valves; ASME B16.34, B16.5, SNI, and Pertamina/PGN engineering standards apply with full traceability and PMI; Vajra Industrial Solutions supplies Bontang LNG, fertiliser, and methanol plant buyers and their turnaround and EPC contractors with cryogenic, API 6D, and severe-service valve packages with complete documentation and Indonesian logistics. Key facilities in the Bontang area - including PT Badak NGL Bontang liquefaction complex, Pupuk Kalimantan Timur ammonia-urea plants, Kaltim Methanol Industri facility - rely on OS&Y Gate Valve (FM/UL) for their lng liquefaction (pt badak ngl - bontang lng plant) operations. Vajra Industrial Solutions supplies OS&Y Gate Valve (FM/UL), Butterfly Valve (Supervisory Switch), Deluge Valve, Check Valve (Fire Water) for fire protection systems projects across East Kalimantan, with full NFPA 13 (Sprinkler Systems) and IS 15105 (India Fire Valve) compliance documentation - EN 10204 3.1 material test certificates, API 598 pressure test reports, and third-party inspection co-ordination available for every order.

Delivery to Bontang

Vajra Industrial Solutions offers export documentation and delivery to Bontang in 7–14 business days. Emergency dispatch available for plant shutdowns and critical site requirements.

Also serving: PT Badak NGL Bontang liquefaction complex, Pupuk Kalimantan Timur ammonia-urea plants, Kaltim Methanol Industri facility, Bontang LNG export jetty and gas gathering

FAQ - Fire Protection Systems Valves in Bontang

Do you supply fire protection systems valves in Bontang?

Yes. Vajra Industrial Solutions supplies OS&Y Gate Valve (FM/UL), Butterfly Valve (Supervisory Switch), Deluge Valve, Check Valve (Fire Water) for fire protection systems applications in Bontang, East Kalimantan. Bontang in East Kalimantan is one of Indonesia's most important process-industry hubs, home to the PT Badak NGL liquefaction complex, the Pupuk Kalimantan Timur ammonia-urea fertiliser plants, and the Kaltim Methanol Industri facility, all fed by regional offshore gas; cryogenic LNG, ammonia, methanol, and gas-processing service calls for a demanding valve portfolio - cryogenic ball, gate, and globe valves in A352 LCC and A182 F316 with extended bonnets for LNG and boil-off duty, API 6D ball and gate valves in A216 WCB for feed-gas and product lines, stainless and special-alloy valves for ammonia and methanol streams, severe-service control valves, and API 526 safety-relief valves; ASME B16.34, B16.5, SNI, and Pertamina/PGN engineering standards apply with full traceability and PMI; Vajra Industrial Solutions supplies Bontang LNG, fertiliser, and methanol plant buyers and their turnaround and EPC contractors with cryogenic, API 6D, and severe-service valve packages with complete documentation and Indonesian logistics. We offer export documentation and delivery to Bontang in 7–14 business days with full documentation and third-party inspection.

What certifications are required for fire protection systems valves in Bontang?

For fire protection systems in Bontang, the applicable standards are: NFPA 13 (Sprinkler Systems), IS 15105 (India Fire Valve), UL 262 / FM 1210 (Gate Valves), UL 668 / FM 1112 (Butterfly Valves), EN 1074-6, AWWA C509 / C515, IS 5290 (Fire Hydrant). All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

What is the delivery time for fire protection systems valves to Bontang?

Standard stock sizes: export documentation and delivery to Bontang in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

Why must fire protection valves be FM or UL listed?

FM Global and UL (Underwriters Laboratories) are independent testing organisations that verify that fire protection equipment performs as specified under fire and flow conditions. Insurance companies (FM Global insures many large industrial facilities) and building codes (NFPA 13) require listed equipment because unlisted equipment has not been tested to a known standard - an unlisted valve might fail to open in an emergency, potentially causing catastrophic loss. In India, IS 15105 provides the equivalent national standard, and BIS-certified valves meet IS 15105 requirements.

What is the difference between an OS&Y valve and a post-indicator valve (PIV)?

Both are tamper-indicating valves used as fire system control valves. OS&Y (Outside Screw and Yoke) gate valves show valve position by the exposure of the threaded stem - when the stem is visible (screwed out), the valve is open. They are used indoors (inside riser closets, valve rooms). Post-Indicator Valves (PIV) are used outdoors - a cast iron post extends from the buried valve with a window showing 'OPEN' or 'SHUT'. PIVs don't require an above-ground valve room and are preferred for large outdoor industrial complexes and warehouses.