Valves for Nuclear Power Plants - Chiba

Name: Vajra Industrial Solutions
Address: 3rd Floor, 348, Aristo Complex, Opp. Sanghani Skyz, Navrachna University Road, Bhayali TP-2, Vadodara, Gujarat, 391410, IN
Telephone: +91-9979774557
Price range: $$

ASME Section III Class 2/3 gate, globe, and check valves with N-stamp traceability for nuclear power plant balance-of-plant, auxiliary, and spent-fuel cooling systems.

ASME Section III (Class 2/3)ASME B16.34IEEE 382 (MOV)IEEE 344 (Seismic)10 CFR 50 Appendix B

Get a Quote +91 9979774557 WhatsApp Quote

API 6D Certified

ASME B16.34

ISO 9001:2015

24h Quote

Nuclear Power Plants Valves - Available in Chiba

Gate Valve (ASME Sec. III Cl.2)

Class 150 / 300 / 600 (ASME B16.34 ratings)

Main isolation on auxiliary cooling, emergency core cooling (ECCS) suction, and spent fuel pool cooling

Materials: A351 CF8M (SS316 cast), A182 F316 forged (Class 2); WCB with SS316 trim (Class 3) · Standards: ASME Section III NB/NC/ND, ASME B16.34, ASME B16.10

View Gate Valve (ASME Sec. III Cl.2) options for Chiba →

Globe Valve

Class 150 / 300

Throttling and control on reactor auxiliary cooling, chemical dosing, and letdown systems

Materials: A351 CF8M SS316, A182 F316L for radioactive waste service · Standards: ASME Section III Class 2/3, IEEE 382 for motor-operated versions

View Globe Valve options for Chiba →

Check Valve

Class 150 / 300 / 600

Back-flow prevention on ECCS injection lines, charging pump outlets, and feedwater systems

Materials: A351 CF8M (SS316), A182 F316 lift or swing check · Standards: ASME Section III Class 2/3, API 594

View Check Valve options for Chiba →

Butterfly Valve

Class 150

Large-bore isolation on service water, component cooling water, and turbine building HVAC

Materials: A216 WCB with SS316 disc and EPDM seat; rubber-lined for raw water service · Standards: ASME Section III Class 3, AWWA C504, IEEE 382

View Butterfly Valve options for Chiba →

Nuclear Power Plants Industry in Chiba

Refining (ENEOS, Cosmo Oil Chiba)Petrochemicals (Sumitomo Chemical, Mitsui Chemicals, Maruzen Petrochemical)Steel (JFE Steel East Japan Works)LNG & Power (JERA Chiba / Sodegaura terminals)EPC & Plant Engineering

Critical Valve Requirements

ASME Section III Class 2/3 design: complete material traceability (Certified Material Test Reports - CMTRs) for all pressure-boundary components

N-stamp or NA-stamp: third-party ASME Nuclear Inspector oversight for Class 2 and above

Seismic qualification per IEEE 344 - valves on safety-related systems must withstand Operating Basis Earthquake (OBE) and Safe Shutdown Earthquake (SSE)

Motor-operated valves (MOVs) qualified per IEEE 382 - torque, voltage variation, and harsh-environment performance testing

QA programme per 10 CFR 50 Appendix B (USA) or AERB Safety Guide (India) - design control, procurement document control, inspection, and test records

No substitution of materials without NCR (Non-Conformance Report) and AERB/NRC approval - traceability is mandatory

Why Chiba's Refining (ENEOS, Cosmo Oil Chiba) Sector Needs Nuclear Power Plants Valves

Chiba anchors Japan's Keiyo Industrial Zone along Tokyo Bay - one of the country's largest integrated hydrocarbon, chemical, and steel complexes - combining ENEOS and Cosmo Oil refineries, Sumitomo Chemical, Mitsui Chemicals, and Maruzen petrochemical plants, JFE Steel's East Japan Works, and the JERA Sodegaura LNG and power terminals; this breadth demands an unusually wide valve portfolio to JIS/JPI and licensor standards - API 6D and JIS B2071 ball, gate, and globe valves in A216 WCB and A351 CF8M for refinery and petrochemical lines, high-temperature WC9 and F22 valves for cracking and reforming, cryogenic gate and ball valves for the LNG terminals, high-temperature and abrasion-resistant valves for blast-furnace and steelmaking duty, fire-safe and low-fugitive valves for emissions control, and API 526 safety-relief valves; JIS B2220 flanges and full traceability are required; Vajra Industrial Solutions supplies Chiba refinery, petrochemical, steel, and LNG buyers with API 6D, high-temperature, cryogenic, and low-emission valve packages with JIS-compliant connections and full material certification. Key facilities in the Chiba area - including Keiyo Industrial Zone (Chiba-Ichihara-Sodegaura), ENEOS and Cosmo Oil Chiba refineries, JFE Steel East Japan Works - rely on Gate Valve (ASME Sec. III Cl.2) for their refining (eneos, cosmo oil chiba) operations. Vajra Industrial Solutions supplies Gate Valve (ASME Sec. III Cl.2), Globe Valve, Check Valve, Butterfly Valve for nuclear power plants projects across Chiba Prefecture, with full ASME Section III (Class 2/3) and ASME B16.34 compliance documentation - EN 10204 3.1 material test certificates, API 598 pressure test reports, and third-party inspection co-ordination available for every order.

Delivery to Chiba

Vajra Industrial Solutions offers export documentation and delivery to Chiba in 7–14 business days. Emergency dispatch available for plant shutdowns and critical site requirements.

Also serving: Keiyo Industrial Zone (Chiba-Ichihara-Sodegaura), ENEOS and Cosmo Oil Chiba refineries, JFE Steel East Japan Works, JERA Sodegaura LNG terminal and power complex

FAQ - Nuclear Power Plants Valves in Chiba

Do you supply nuclear power plants valves in Chiba?

Yes. Vajra Industrial Solutions supplies Gate Valve (ASME Sec. III Cl.2), Globe Valve, Check Valve, Butterfly Valve for nuclear power plants applications in Chiba, Chiba Prefecture. Chiba anchors Japan's Keiyo Industrial Zone along Tokyo Bay - one of the country's largest integrated hydrocarbon, chemical, and steel complexes - combining ENEOS and Cosmo Oil refineries, Sumitomo Chemical, Mitsui Chemicals, and Maruzen petrochemical plants, JFE Steel's East Japan Works, and the JERA Sodegaura LNG and power terminals; this breadth demands an unusually wide valve portfolio to JIS/JPI and licensor standards - API 6D and JIS B2071 ball, gate, and globe valves in A216 WCB and A351 CF8M for refinery and petrochemical lines, high-temperature WC9 and F22 valves for cracking and reforming, cryogenic gate and ball valves for the LNG terminals, high-temperature and abrasion-resistant valves for blast-furnace and steelmaking duty, fire-safe and low-fugitive valves for emissions control, and API 526 safety-relief valves; JIS B2220 flanges and full traceability are required; Vajra Industrial Solutions supplies Chiba refinery, petrochemical, steel, and LNG buyers with API 6D, high-temperature, cryogenic, and low-emission valve packages with JIS-compliant connections and full material certification. We offer export documentation and delivery to Chiba in 7–14 business days with full documentation and third-party inspection.

What certifications are required for nuclear power plants valves in Chiba?

For nuclear power plants in Chiba, the applicable standards are: ASME Section III (Class 2/3), ASME B16.34, IEEE 382 (MOV), IEEE 344 (Seismic), 10 CFR 50 Appendix B, AERB (India), NRC Regulatory Guides. All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

What is the delivery time for nuclear power plants valves to Chiba?

Standard stock sizes: export documentation and delivery to Chiba in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

What is ASME Section III and why does nuclear require it?

ASME Section III is the Boiler and Pressure Vessel Code for Nuclear Facility Components. Unlike ASME B16.34 (industrial valves), Section III imposes full design analysis, material traceability to mill certificates (CMTRs), N-stamp third-party oversight during manufacturing, and complete quality records. Class 1 covers the primary pressure boundary (reactor coolant), Class 2 covers safety-related secondary systems (ECCS, spent fuel cooling), and Class 3 covers other safety-related systems (service water). Vajra supplies Class 2 and 3 components for balance-of-plant applications.

What is the difference between nuclear Class 2 and Class 3 valves?

ASME Section III Class 2 applies to systems that could affect the safety function of the reactor coolant boundary - e.g., emergency core cooling, spent fuel pool cooling. Class 3 applies to systems important to safety but with a lower direct interface - service water, fire protection, component cooling water. Class 2 requires more rigorous design documentation, full material traceability, and N-stamp inspection. Class 3 has slightly relaxed requirements but still demands CMTRs and a documented QA programme.