Name: Vajra Industrial Solutions
Address: 3rd Floor, 348, Aristo Complex, Opp. Sanghani Skyz, Navrachna University Road, Bhayali TP-2, Vadodara, Gujarat, 391410, IN
Telephone: +91-9979774557
Price range: $$

Question 1

Do you supply carbon capture & storage (ccs) valves in Tokyo?

Accepted Answer

Yes. Vajra Industrial Solutions supplies Globe Valve (Amine Service), Ball Valve (Supercritical CO₂), Gate Valve (CO₂ Pipeline), Check Valve (CO₂ Compressor) for carbon capture & storage (ccs) applications in Tokyo, Tokyo. Japan's industrial base — Mitsubishi, JGC, and Toyo Engineering procure globally for mega-projects across Asia. We offer export documentation and delivery to Tokyo in 7–14 business days with full documentation and third-party inspection.

Question 2

What certifications are required for carbon capture & storage (ccs) valves in Tokyo?

Accepted Answer

For carbon capture & storage (ccs) in Tokyo, the applicable standards are: NACE MR0175 / ISO 15156 (sour CO₂), ASME B16.34, API 6D, API 607 (Fire-Safe), ISO 15848-1 (Fugitive Emissions), API 598, ISO 21013 (CO₂ Safety). All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.

Question 3

What is the delivery time for carbon capture & storage (ccs) valves to Tokyo?

Accepted Answer

Standard stock sizes: export documentation and delivery to Tokyo in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.

Question 4

Can carbon steel valves be used in CO₂ service?

Accepted Answer

Dry CO₂ (water content below 50 ppm) does not corrode carbon steel — dried CO₂ from industrial sources is used in carbon steel pipelines. However, wet CO₂ (water-saturated gas or any liquid CO₂ + water) forms carbonic acid (pH ≈ 3.7 at 1 bar CO₂ partial pressure), which corrodes carbon steel rapidly (>10 mm/year in worst cases). Therefore: dry CO₂ pipeline and injection service — carbon steel A216 WCB acceptable with SS316 trim. Wet CO₂ anywhere in the process — SS316L mandatory. When in doubt, specify SS316L — the cost premium is small versus the corrosion risk.

Question 5

What is the difference between CCS and carbon capture for enhanced oil recovery (CO₂-EOR)?

Accepted Answer

Carbon capture and storage (CCS) injects CO₂ into saline aquifers or depleted reservoirs for permanent geological storage. CO₂-EOR (Enhanced Oil Recovery) injects CO₂ into producing oil reservoirs to mobilise residual oil — the CO₂ is partially recycled from produced gas. Valve specifications are similar: both require Class 900–2500 forged SS316L or Duplex 2205 for injection service. CO₂-EOR streams have higher impurity (H₂S, hydrocarbons) requiring NACE MR0175. Pure CCS streams from power plant flue gas typically contain only CO₂ + traces of SO₂ and NOₓ — simpler chemistry, SS316L usually sufficient.

Valves for Carbon Capture & Storage (CCS) — Tokyo

Carbon Capture & Storage (CCS) Valves — Available in Tokyo

Globe Valve (Amine Service)

Ball Valve (Supercritical CO₂)

Gate Valve (CO₂ Pipeline)

Check Valve (CO₂ Compressor)

Carbon Capture & Storage (CCS) Industry in Tokyo

Critical Valve Requirements

Why Tokyo's Semiconductor Sector Needs Carbon Capture & Storage (CCS) Valves

Delivery to Tokyo

FAQ — Carbon Capture & Storage (CCS) Valves in Tokyo

Other Application Guides for Tokyo

Carbon Capture & Storage (CCS) Valves — Tokyo