HomeLocationsStockholmNuclear Power Plants

Stockholm · Nuclear Power Plants

Valves for Nuclear Power Plants — Stockholm

Stockholm is Sweden's pharmaceutical and life sciences capital — AstraZeneca's Södertälje manufacturing campus (biologic and small-molecule APIs) requires sanitary SS 316L diaphragm valves, ASME BPE clean-steam ball valves, and USP Class VI compliant valves for GMP manufacturing; Stockholm's district heating network (Fortum Värme / Stockholm Exergi, ~12,000 MWh) uses ASME Class 150–300 gate valves and globe valves for heat exchange stations; Vajra Industrial Solutions supplies GMP-compliant sanitary valves for Stockholm pharma manufacturers, PED-certified steam gate and globe valves for district heating, and stainless steel butterfly valves for Stockholm Vatten water infrastructure.

ASME Section III Class 2/3 gate, globe, and check valves with N-stamp traceability for nuclear power plant balance-of-plant, auxiliary, and spent-fuel cooling systems.

ASME Section III (Class 2/3)ASME B16.34IEEE 382 (MOV)IEEE 344 (Seismic)10 CFR 50 Appendix B
Get a Quote +91 9979774557WhatsApp Quote
API 6D Certified
ASME B16.34
ISO 9001:2015
24h Quote

Nuclear Power Plants Valves — Available in Stockholm

Gate Valve (ASME Sec. III Cl.2)

Class 150 / 300 / 600 (ASME B16.34 ratings)

Main isolation on auxiliary cooling, emergency core cooling (ECCS) suction, and spent fuel pool cooling

Materials: A351 CF8M (SS316 cast), A182 F316 forged (Class 2); WCB with SS316 trim (Class 3)  ·  Standards: ASME Section III NB/NC/ND, ASME B16.34, ASME B16.10
View Gate Valve (ASME Sec. III Cl.2) options for Stockholm →

Globe Valve

Class 150 / 300

Throttling and control on reactor auxiliary cooling, chemical dosing, and letdown systems

Materials: A351 CF8M SS316, A182 F316L for radioactive waste service  ·  Standards: ASME Section III Class 2/3, IEEE 382 for motor-operated versions
View Globe Valve options for Stockholm →

Check Valve

Class 150 / 300 / 600

Back-flow prevention on ECCS injection lines, charging pump outlets, and feedwater systems

Materials: A351 CF8M (SS316), A182 F316 lift or swing check  ·  Standards: ASME Section III Class 2/3, API 594
View Check Valve options for Stockholm →

Butterfly Valve

Class 150

Large-bore isolation on service water, component cooling water, and turbine building HVAC

Materials: A216 WCB with SS316 disc and EPDM seat; rubber-lined for raw water service  ·  Standards: ASME Section III Class 3, AWWA C504, IEEE 382
View Butterfly Valve options for Stockholm →

Nuclear Power Plants Industry in Stockholm

Stockholm is Sweden's pharmaceutical and life sciences capital — AstraZeneca's Södertälje manufacturing campus (biologic and small-molecule APIs) requires sanitary SS 316L diaphragm valves, ASME BPE clean-steam ball valves, and USP Class VI compliant valves for GMP manufacturing; Stockholm's district heating network (Fortum Värme / Stockholm Exergi, ~12,000 MWh) uses ASME Class 150–300 gate valves and globe valves for heat exchange stations; Vajra Industrial Solutions supplies GMP-compliant sanitary valves for Stockholm pharma manufacturers, PED-certified steam gate and globe valves for district heating, and stainless steel butterfly valves for Stockholm Vatten water infrastructure.

Pharmaceuticals (AstraZeneca, Sobi)Chemical & Specialty ChemicalPower & District HeatingWater & WastewaterEngineering & Manufacturing

Critical Valve Requirements

ASME Section III Class 2/3 design: complete material traceability (Certified Material Test Reports — CMTRs) for all pressure-boundary components
N-stamp or NA-stamp: third-party ASME Nuclear Inspector oversight for Class 2 and above
Seismic qualification per IEEE 344 — valves on safety-related systems must withstand Operating Basis Earthquake (OBE) and Safe Shutdown Earthquake (SSE)
Motor-operated valves (MOVs) qualified per IEEE 382 — torque, voltage variation, and harsh-environment performance testing
QA programme per 10 CFR 50 Appendix B (USA) or AERB Safety Guide (India) — design control, procurement document control, inspection, and test records
No substitution of materials without NCR (Non-Conformance Report) and AERB/NRC approval — traceability is mandatory

Why Stockholm's Pharmaceuticals (AstraZeneca, Sobi) Sector Needs Nuclear Power Plants Valves

Stockholm is Sweden's pharmaceutical and life sciences capital — AstraZeneca's Södertälje manufacturing campus (biologic and small-molecule APIs) requires sanitary SS 316L diaphragm valves, ASME BPE clean-steam ball valves, and USP Class VI compliant valves for GMP manufacturing; Stockholm's district heating network (Fortum Värme / Stockholm Exergi, ~12,000 MWh) uses ASME Class 150–300 gate valves and globe valves for heat exchange stations; Vajra Industrial Solutions supplies GMP-compliant sanitary valves for Stockholm pharma manufacturers, PED-certified steam gate and globe valves for district heating, and stainless steel butterfly valves for Stockholm Vatten water infrastructure. Key facilities in the Stockholm area — including AstraZeneca Södertälje manufacturing campus, Stockholm Vatten water utility infrastructure, Neste Nynäshamn renewable fuels terminal — rely on Gate Valve (ASME Sec. III Cl.2) for their water & wastewater operations. Vajra Industrial Solutions supplies Gate Valve (ASME Sec. III Cl.2), Globe Valve, Check Valve, Butterfly Valve for nuclear power plants projects across Stockholm County, with full ASME Section III (Class 2/3) and ASME B16.34 compliance documentation — EN 10204 3.1 material test certificates, API 598 pressure test reports, and third-party inspection co-ordination available for every order.

Delivery to Stockholm

Vajra Industrial Solutions offers export documentation and delivery to Stockholm in 7–14 business days. Emergency dispatch available for plant shutdowns and critical site requirements.

Also serving: AstraZeneca Södertälje manufacturing campus, Stockholm Vatten water utility infrastructure, Neste Nynäshamn renewable fuels terminal, Höganäs metal powder (north of Stockholm), LKAB logistics centre (iron ore supply chain)

FAQ — Nuclear Power Plants Valves in Stockholm

Do you supply nuclear power plants valves in Stockholm?
Yes. Vajra Industrial Solutions supplies Gate Valve (ASME Sec. III Cl.2), Globe Valve, Check Valve, Butterfly Valve for nuclear power plants applications in Stockholm, Stockholm County. Stockholm is Sweden's pharmaceutical and life sciences capital — AstraZeneca's Södertälje manufacturing campus (biologic and small-molecule APIs) requires sanitary SS 316L diaphragm valves, ASME BPE clean-steam ball valves, and USP Class VI compliant valves for GMP manufacturing; Stockholm's district heating network (Fortum Värme / Stockholm Exergi, ~12,000 MWh) uses ASME Class 150–300 gate valves and globe valves for heat exchange stations; Vajra Industrial Solutions supplies GMP-compliant sanitary valves for Stockholm pharma manufacturers, PED-certified steam gate and globe valves for district heating, and stainless steel butterfly valves for Stockholm Vatten water infrastructure. We offer export documentation and delivery to Stockholm in 7–14 business days with full documentation and third-party inspection.
What certifications are required for nuclear power plants valves in Stockholm?
For nuclear power plants in Stockholm, the applicable standards are: ASME Section III (Class 2/3), ASME B16.34, IEEE 382 (MOV), IEEE 344 (Seismic), 10 CFR 50 Appendix B, AERB (India), NRC Regulatory Guides. All valves are supplied with full documentation including material test reports (EN 10204 3.1/3.2), pressure test certificates, and dimensional inspection reports. Third-party inspection (TPI) by EIL, Bureau Veritas, Lloyd's Register, or the client's nominated inspector can be arranged.
What is the delivery time for nuclear power plants valves to Stockholm?
Standard stock sizes: export documentation and delivery to Stockholm in 7–14 business days. Custom sizes and special materials (Duplex, Hastelloy, P91): 4–8 weeks manufacturing lead time. Express dispatch available for urgent site requirements. Contact us at +91-9979774557 or sales@vajravyuh.com with your specification and required delivery date.
What is ASME Section III and why does nuclear require it?
ASME Section III is the Boiler and Pressure Vessel Code for Nuclear Facility Components. Unlike ASME B16.34 (industrial valves), Section III imposes full design analysis, material traceability to mill certificates (CMTRs), N-stamp third-party oversight during manufacturing, and complete quality records. Class 1 covers the primary pressure boundary (reactor coolant), Class 2 covers safety-related secondary systems (ECCS, spent fuel cooling), and Class 3 covers other safety-related systems (service water). Vajra supplies Class 2 and 3 components for balance-of-plant applications.
What is the difference between nuclear Class 2 and Class 3 valves?
ASME Section III Class 2 applies to systems that could affect the safety function of the reactor coolant boundary — e.g., emergency core cooling, spent fuel pool cooling. Class 3 applies to systems important to safety but with a lower direct interface — service water, fire protection, component cooling water. Class 2 requires more rigorous design documentation, full material traceability, and N-stamp inspection. Class 3 has slightly relaxed requirements but still demands CMTRs and a documented QA programme.

Other Application Guides for Stockholm

Oil & Gas PipelinesPharmaceutical & Biotech (Cleanroom / Hygienic)LNG & Cryogenic ServiceWater Treatment & DesalinationRefinery & Petrochemical ProcessPower Generation (Thermal, Gas, Hydro)Marine & Offshore ServiceMining & Mineral ProcessingHVAC & Building ServicesChemical & Petrochemical ProcessingHygienic Food & Beverage ProcessingHydrogen & Clean Energy ServiceDesalination & High-Purity WaterPulp & Paper IndustryAmmonia & Fertiliser PlantsOffshore & Subsea ApplicationsCoke Oven & Steel PlantsEthylene Crackers & Olefin PlantsChlor-Alkali PlantsSugar & Ethanol PlantsGeothermal Power PlantsAir Separation Units (ASU)Compressed Gas & CNG SystemsBiogas & Biomass PlantsCarbon Capture & Storage (CCS)Fire Protection SystemsShipbuilding & Marine RepairDistrict Heating & Cooling SystemsPharmaceutical & Biotechnology PlantsGlass, Ceramics & Refractory IndustriesTextile & Dyeing Plants

Get a Quote

Nuclear Power Plants Valves — Stockholm

Send your specification — quote within 24 hours with full documentation.

Request a Quote sales@vajravyuh.com +91 9979774557

Standards

ASME Section III (Class 2/3)
ASME B16.34
IEEE 382 (MOV)
IEEE 344 (Seismic)
10 CFR 50 Appendix B
AERB (India)
NRC Regulatory Guides

Product Categories

Gate Valves Globe Valves Butterfly Valves Check Valves

All Valves for Stockholm

View all valve types →All application guides →