Equivalent lookup
Designation Cross-Reference

1.4410 — ASTM Equivalent

Holding a datasheet that specifies 1.4410 (EN)? The valve-grade equivalent, its properties, and certified supply of the matching ASTM grade.

What is the ASTM equivalent of 1.4410?

1.4410 is a EN designation corresponding to ASTM A182 F53 / UNS S32750 (Super Duplex 2507) (Super Duplex 2507) and A890 Grade 5A (Super Duplex 2507 (Grade 5A Cast)) for industrial valve service. The full grade data is below - equivalence is by nominal chemistry and mechanical class, so confirm composition and heat-treat condition against the governing standard before substituting in critical service.

Super Duplex 2507 - both form.

Service temperature-50°C to +300°C
Nominal compositionCr 25%, Ni 7%, Mo 4%, N 0.27%. PREN > 40. UNS S32750.

Typical service: Seawater injection and produced water treatment (offshore); Subsea control valve bodies and wellhead isolation; Desalination plant high-pressure piping valves

A890 Grade 5A

Duplex & Super Duplex

Super Duplex 2507 (Grade 5A Cast) - cast form.

Service temperature-46°C to +300°C
Nominal compositionC ≤ 0.03%, Mn ≤ 1.20%, Si ≤ 0.80%, Cr 24.00–26.00%, Ni 6.00–8.00%, Mo 3.00–5.00%, N 0.24–0.32%, Cu ≤ 0.50%

Typical service: Deepwater subsea valves - seawater injection and well-testing at high chloride, high pressure; Offshore produced water re-injection (PWRI) valves - H₂S + CO₂ + chloride environments; FGD (flue gas desulphurisation) slurry recirculation valves - high-Cl sulfate solution

Reviewed by Materials Engineering, Vajra Industrial SolutionsDiscipline: Valve Metallurgy & Materials SelectionLast reviewed: 20 June 2026

Connected Engineering

Need valves in 1.4410 / its ASTM equivalent?

We supply A182 F53 / UNS S32750 (Super Duplex 2507) / A890 Grade 5A valves - the 1.4410 equivalent - with EN 10204 3.1 material certification. Share the datasheet for a 24-hour quote.

Engineering references