Check Valves — Piping Class A6A
The check valves specification for piping class A6A (ASME Class 2500, Extreme High Pressure - Ultra-HP Wellhead, HP Instrument & Test Systems to 412 bar) — body, trim, seat, end connection and rating, ready to quote.
What is the check valves spec for piping class A6A?
Piping class A6A (ASME Class 2500) covers Extreme High Pressure - Ultra-HP Wellhead, HP Instrument & Test Systems to 412 bar with a Carbon Steel ASTM A216 WCB / A182 F22 Forged (2¼Cr-1Mo) body material and 3mm corrosion allowance, rated for 412 bar (5975 psi) at Up to 400°C (752°F). The check valves specification for this class is below.
| Type | Rating | Body | Trim | Seat | End Conn. |
|---|---|---|---|---|---|
| Check Valve | Class 2500 | A216 WCB / A182 F22 | Stellite-6 HF | Stellite-6 HF | BW or RTJ |
- -Check Valve: Piston lift type; low volume, extreme pressure
Vajra Check Valves
Non-return valves to prevent backflow and protect equipment in piping systems.
See the full Check Valves rangeOther valves in piping class A6A
Check Valves in other piping classes
Connected Engineering
Need check valves to piping class A6A?
Send your valve schedule — we supply all check valves to A6A specification (body, trim, seat, rating) with full certification and a 24-hour quote.