Check Valves — Piping Class D1A
The check valves specification for piping class D1A (ASME Class 150, Sour Service - H₂S Containing Hydrocarbons, NACE MR0175) — body, trim, seat, end connection and rating, ready to quote.
What is the check valves spec for piping class D1A?
Piping class D1A (ASME Class 150) covers Sour Service - H₂S Containing Hydrocarbons, NACE MR0175 with a Carbon Steel WCB / ASTM A216 with NACE MR0175 hardness control body material and 3mm + NACE hardness limit corrosion allowance, rated for 16 bar (232 psi) at Up to 200°C (392°F). The check valves specification for this class is below.
| Type | Rating | Body | Trim | Seat | End Conn. |
|---|---|---|---|---|---|
| Check Valve | Class 150 | A216 WCB (NACE) | 13Cr (NACE) | 13Cr HF | RF Flange |
- -Check Valve: NACE hardness cert mandatory
Vajra Check Valves
Non-return valves to prevent backflow and protect equipment in piping systems.
See the full Check Valves rangeOther valves in piping class D1A
Check Valves in other piping classes
Connected Engineering
Need check valves to piping class D1A?
Send your valve schedule — we supply all check valves to D1A specification (body, trim, seat, rating) with full certification and a 24-hour quote.