Caustic Soda (NaOH) service
Service Selection
Globe Valves for Caustic Soda (NaOH) Service
Which globe valves configuration suits Caustic Soda (NaOH) (NaOH), in which material, to which standard — from real service data, with the pitfalls flagged.
Which globe valves for Caustic Soda (NaOH)?
Nickel 200 globe valve - Hot concentrated NaOH - gold standard material, no SCC risk Typical service window: 1–25 bar, Ambient to 130°C.
Recommended Configurations
Nickel 200 globe valve
Hot concentrated NaOH - gold standard material, no SCC risk
Body Material for Caustic Soda (NaOH)
Rated from real compatibility data - click any material for the full decision page.
Governing Standards for Caustic Soda (NaOH) Service
What to Avoid in Caustic Soda (NaOH) Service
- Aluminium-bodied valves (any concentration)
- Zinc die-cast components
- SS 304/316 in hot caustic above 60°C
Service Considerations
- Heat tracing required where caustic may solidify in dead legs or low-flow areas
- Nickel alloys must be used for hot evaporator service
- All welds on CS in hot caustic must be stress-relieved per NACE SP0403
- Flushing connections required - caustic crystallises on exposed surfaces
Other valve types for Caustic Soda (NaOH)
Globe Valves for other services
Globe Valves for Sulphuric Acid (H₂SO₄)Globe Valves for Chlorine (Cl₂)Globe Valves for Ammonia (NH₃)Globe Valves for High-Pressure SteamGlobe Valves for Hydrogen (H₂)Globe Valves for Hydrofluoric Acid (HF)Globe Valves for Hot Oil (Thermal Heat Transfer Fluid)Globe Valves for MEG / Glycol (Monoethylene Glycol - Gas Dehydration)
Reviewed by Process Engineering, Vajra Industrial SolutionsDiscipline: Process & Fluid Service EngineeringLast reviewed: 20 June 2026
Connected Engineering
Standards
Failure Modes
Products
Comparisons
Need globe valves for Caustic Soda (NaOH) service?
Send your conditions - we confirm the configuration and material for Caustic Soda (NaOH) and quote with full certification in 24 hours.
Relevant Products