Sulphuric Acid (H₂SO₄) service

Service Selection

Globe Valves for Sulphuric Acid (H₂SO₄) Service

Which globe valves configuration suits Sulphuric Acid (H₂SO₄) (H₂SO₄), in which material, to which standard — from real service data, with the pitfalls flagged.

Which globe valves for Sulphuric Acid (H₂SO₄)?

Alloy-body globe valve - Throttling service in corrosive acid streams Typical service window: 0.5–25 bar (7–360 psi) - process dependent, Ambient to 80°C typical; up to 200°C in some processes.

Recommended Configurations

Alloy-body globe valve

Throttling service in corrosive acid streams

Body Material for Sulphuric Acid (H₂SO₄)

Rated from real compatibility data - click any material for the full decision page.

Hastelloy C-276Excellent across all concentrations. Industry standard for dilute H₂SO₄.Excellent PTFE-linedPTFE is excellent across all concentrations and temperatures up to 200°C.Excellent Carbon SteelOnly for >93% concentrated acid at ambient temperature. Not for dilute acid.Good FRP / PVDF-linedPVDF and FRP good for <80% concentrations.Good SS 316LUp to ~20% at <25°C. Not recommended above 20% or elevated temperature.Fair Duplex 2205Limited to dilute, cold service only. Verify with corrosion data.Fair Ductile IronNot recommended for any concentration.Poor Bronze/BrassSeverely attacked. Never use copper alloys.Not Recommended

Governing Standards for Sulphuric Acid (H₂SO₄) Service

ASME B16.34ISO 15761NACE MR0103 (where H₂S present)API 607 (fire safe)

What to Avoid in Sulphuric Acid (H₂SO₄) Service

Bronze or brass-bodied valves
Standard SS 316 for concentrated acid above 20%
Rubber-lined valves (except EPDM in specific concentrations)

Service Considerations

Always design for double containment or secondary containment
Emergency shower and eyewash must be immediately accessible
Full-bore valves preferred to minimise turbulence and localised attack
Dilution point design must prevent acid-in-water splashback
ATEX rating required where sulphur vapours present

Other valve types for Sulphuric Acid (H₂SO₄)

Ball Valves for Sulphuric Acid (H₂SO₄)Butterfly Valves for Sulphuric Acid (H₂SO₄)Diaphragm Valves for Sulphuric Acid (H₂SO₄)

Globe Valves for other services

Globe Valves for Chlorine (Cl₂)Globe Valves for Ammonia (NH₃)Globe Valves for High-Pressure Steam Globe Valves for Hydrogen (H₂)Globe Valves for Caustic Soda (NaOH)Globe Valves for Hydrofluoric Acid (HF)Globe Valves for Hot Oil (Thermal Heat Transfer Fluid)Globe Valves for MEG / Glycol (Monoethylene Glycol - Gas Dehydration)

Reviewed by Process Engineering, Vajra Industrial SolutionsDiscipline: Process & Fluid Service EngineeringLast reviewed: 20 June 2026

Connected Engineering

Standards

ASME B16.34 NACE MR0175 API 607 Fire-Safe

Services

Products

Comparisons

Globe vs Gate Valve

Need globe valves for Sulphuric Acid (H₂SO₄) service?

Send your conditions - we confirm the configuration and material for Sulphuric Acid (H₂SO₄) and quote with full certification in 24 hours.

Request a Quote WhatsApp Call

Relevant Products

Vajra Globe Valves

Engineering references

Sulphuric Acid (H₂SO₄) service guideFull compatibility, standards & considerations Vajra Globe ValvesFull range, specs & standards Spec Check engineValidate this spec before the RFQ