Crude Oil service
Service Selection
Ball Valves for Crude Oil Service
Which ball valves configuration suits Crude Oil, in which material, to which standard — from real service data, with the pitfalls flagged.
Which ball valves for Crude Oil?
API 6D trunnion mounted ball valve - Pipeline standard for crude - proven in HPHT crude service Typical service window: 5–250 bar (pipeline to wellhead), Ambient to 180°C (refinery crude distillation up to 350°C).
Recommended Configurations
API 6D trunnion mounted ball valve
Pipeline standard for crude - proven in HPHT crude service
Body Material for Crude Oil
Rated from real compatibility data - click any material for the full decision page.
Governing Standards for Crude Oil Service
What to Avoid in Crude Oil Service
- Applies to this type: Ball valves with PTFE seats in high-temperature crude above 180°C
- Applies to this type: Globe valves for mainline isolation (use gate or ball)
- Check valves with rubber discs in crude service
Service Considerations
- Sour service (H₂S): all wetted metal hardness ≤ 22 HRC per NACE MR0175
- ESDV (emergency shut-down valve) with fire-safe design per API 607
- Pigging requirement: full-bore, no bore reductions
- Antistatic device required for ball and butterfly valves
- Wax-prone crude may need heated valve enclosures
Other valve types for Crude Oil
Ball Valves for other services
Reviewed by Process Engineering, Vajra Industrial SolutionsDiscipline: Process & Fluid Service EngineeringLast reviewed: 20 June 2026
Connected Engineering
Failure Modes
Services
Products
Need ball valves for Crude Oil service?
Send your conditions - we confirm the configuration and material for Crude Oil and quote with full certification in 24 hours.
Relevant Products