NORSOK M-630 Gate Valves
What NORSOK M-630 requires for gate valves — applicability, key and testing requirements, the alternative standards, and compliant supply with full certification.
What does NORSOK M-630 require for gate valves?
NORSOK M-630 (Material Data Sheets and Element Requirements for Piping, NORSOK Standards (Norwegian Oil and Gas Industry)) sets the design, material and testing requirements for gate valves in its scope. NORSOK M-630 is a Norwegian offshore standard that specifies material data sheets (MDS) and element requirements for piping components - including valves - used on the Norwegian Continental Shelf. Developed by the Norwegian oil and gas industry (historically anchored by Equinor/Statoil), NORSOK standards are mandatory for all topsides and subsea piping on Norwegian offshore installations. M-630 supplements and extends ASME/API and EN material requirements with additional chemistry, mechanical property, heat treatment, and impact toughness criteria needed for Arctic and offshore service conditions. Supplying valves to Norwegian offshore projects without NORSOK M-630 compliance documentation is not accepted.
Applicable Pressure Classes
Key Requirements
- Material Data Sheet (MDS) reference must be specified for each piping component
- Carbon steel valves: NORSOK M-630 MDS C01/C02 - Charpy impact test required at −46°C for sweet service
- Duplex stainless steel: MDS D45 or D46 - PREN ≥ 35, Charpy impact ≥ 45 J at −46°C, ferrite content 35–55%
- Super-duplex (UNS S32750/S32760): MDS D47 - PREN ≥ 42, stricter intermetallic phase requirements
- Austenitic SS (316L): MDS S01 - corrosion test per ASTM A262 Practice E (intergranular corrosion)
- All MDS materials require full 3.1 Mill Test Reports (MTR) with heat/cast number traceability
- Hardness testing required on all weld joints and heat-affected zones
- NACE MR0175 compliance required when H₂S partial pressure conditions exist
Testing Requirements
- Charpy impact testing at −46°C (or lower for Arctic service) per MDS requirements
- Corrosion testing per applicable MDS (ASTM A262, ASTM G48, or ASTM A923)
- Ferrite content measurement for duplex/super-duplex stainless valves
- Pitting resistance equivalent number (PREN) verification for stainless alloys
Alternative Standards for Gate Valves
Other standards that also govern gate valves — useful for spec cross-acceptance.
Connected Engineering
Need NORSOK M-630 gate valves?
We supply NORSOK M-630-compliant gate valves with full certification — share your size, class and service for a 24-hour quote.