Power Generation Valves
Industrial Valves for Power Generation
Engineered for Steam, Pressure, and Reliability
Power generation plants - thermal, combined-cycle, nuclear, and renewable - demand valves that perform reliably under extreme steam pressures and temperatures, often in safety-critical service. Vajra Industrial Solutions supplies ASME B16.34-rated gate, globe, check, and control valves in alloy steel grades (WC6, WC9, F91) for main steam, feedwater, turbine bypass, and condensate service.
What valves does the Power industry use?
Power generation plants - thermal, combined-cycle, nuclear, and renewable - demand valves that perform reliably under extreme steam pressures and temperatures, often in safety-critical service.
Key Power Applications
We supply application-specific valve solutions for each segment of the power generation industry.
Main Steam & Reheat
High-pressure gate and globe valves for main steam isolation and reheat headers. Pressure-seal bonnet design for Class 900–2500 service.
Boiler Feed Water
ASME Class 600–1500 check and globe valves for BFW pumps, deaerators, and economiser service.
Turbine Bypass & Drain
Y-pattern globe valves and angle globe valves for turbine bypass, steam trapping drain, and blow-down service.
Recommended Valve Range for Power
Our most commonly supplied valve types for power generation applications.
| Valve Type | Specification |
|---|---|
| Pressure Seal Gate Valve | Class 900–2500, A217 WC9/C12A, butt-weld ends |
| Y-Type Globe Valve | Class 600–900, A217 WC6/WC9, ASME B16.34 |
| Globe Type Control Valve | Class 300–900, equal-%, Stellite trim, IBR |
Applicable Standards & Certifications
- ASME B16.34
- API 600
- API 623
- IBR (Indian Boiler Regulations)
- ASME Section VIII
Available Materials of Construction
- A217 WC6
- A217 WC9
- A182 F91
- A182 F22
- A351 CF8M
Frequently Asked Questions - Power Valves
What materials are used for main steam valves above 540°C?+
Do your power plant valves comply with IBR?+
Connected Engineering
Power Procurement & Specification
Typical Applications
Available Standards
Material Options
Documentation Available
- -EN 10204 3.1 Material Test Certificates (heat traceable)
- -API 598 hydrostatic shell & seat test reports
- -Dimensional inspection reports
- -Full Manufacturing Data Record (MDR) / data book on request
Inspection Options
- -In-house QC inspection on every order
- -Third-party inspection (SGS / Bureau Veritas / TÜV / DNV) coordination
- -Witness and hold points accommodated on request
Order Quantities
Flexible — from single critical-spare valves to full project lots.
Export
Worldwide export with complete documentation (COO, EUR.1, packing lists) to 20+ countries.
Custom Engineering
Built to your specification — materials, trim, pressure class and special service (NACE, fire-safe, IBR, cryogenic).
Delivery Support
Dispatch from Vadodara, Gujarat with documented lead times and priority handling for urgent requirements.
Need Power Valves? Get a Quote Today.
API 6D, ASME B16.34 certified. Full documentation. 24-hour quote response. Contact us at sales@vajravyuh.com or +91 9979774557
