Acetic Acid (CH₃COOH) service
Service Selection
Ball Valves for Acetic Acid (CH₃COOH) Service
Which ball valves configuration suits Acetic Acid (CH₃COOH) (CH₃COOH), in which material, to which standard — from real service data, with the pitfalls flagged.
Which ball valves for Acetic Acid (CH₃COOH)?
Ball Valve (Hastelloy C-276 or Ti body) - Isolation in PTA oxidation and hot acetic acid circuits Typical service window: 1–25 barg (storage, transfer, PTA oxidation reactor), Ambient to +220°C (PTA oxidation circuit).
Recommended Configurations
Ball Valve (Hastelloy C-276 or Ti body)
Isolation in PTA oxidation and hot acetic acid circuits
Body Material for Acetic Acid (CH₃COOH)
Rated from real compatibility data - click any material for the full decision page.
Governing Standards for Acetic Acid (CH₃COOH) Service
What to Avoid in Acetic Acid (CH₃COOH) Service
- Carbon steel valves - severely corroded
- Bronze/brass - attacked by acetic acid
- SS 316 for hot concentrated service without corrosion allowance review
Service Considerations
- PTA oxidation service: air + acetic acid + xylene at 180–220°C is extremely aggressive - Hastelloy or titanium mandatory
- PTFE-lined valves acceptable for lower-temperature dilute acetic acid circuits
- Fire-safe valve design required in ATEX Zone 1 PTA production areas
Other valve types for Acetic Acid (CH₃COOH)
Ball Valves for other services
Reviewed by Process Engineering, Vajra Industrial SolutionsDiscipline: Process & Fluid Service EngineeringLast reviewed: 20 June 2026
Connected Engineering
Materials
Failure Modes
Products
Need ball valves for Acetic Acid (CH₃COOH) service?
Send your conditions - we confirm the configuration and material for Acetic Acid (CH₃COOH) and quote with full certification in 24 hours.
Relevant Products