Angle Globe Valve
90-degree angle body design for applications requiring directional flow change.
Technical Specifications
| Type | Angle Pattern |
| Size Range | 1/2" to 6" (15 mm to 150 mm) |
| Body Materials | Carbon Steel, SS304, SS316, Bronze |
| Disc & Seat | SS316, Stellite hard-faced |
| End Connections | Flanged, Screwed, Socket Weld |
| Pressure Rating | PN16 / PN25, Class 150 / 300 |
| Standards | API 602, ASME B16.34 |
Applications
Boiler blow-down, steam systems, process lines
About the Angle Globe Valve
The angle globe valve has its inlet and outlet at 90 degrees to each other - unlike the Z-type where both connections are on the same axis. This right-angle body design serves two practical purposes: first, it eliminates the need for a separate 90-degree elbow in the piping, reducing the number of flanged joints, pipe fittings, and potential leak points while shortening the overall installation length; second, the angled flow path reduces turbulence compared to the Z-type globe, resulting in a lower pressure drop coefficient (higher Cv) in a given body size. The disc and seat are oriented so that the disc travels perpendicular to the inlet flow, impinging on the fluid as it enters - this gives the angle globe its characteristic high-velocity throttling capability suited to steam, hot water, and process condensate applications.
Angle globe valves are the standard design for boiler steam-generating coil inlet and outlet connections, where the pipe naturally makes a 90-degree turn from a horizontal steam header to a vertical riser. They are also used on the steam chest inlet valves of reciprocating steam pumps and process compressors, and on boiler blowdown connections mounted flush on the drum wall. Vajra Industrial Solutions supplies angle globe valves in sizes 1/2" to 6" in Carbon Steel, SS316, and Bronze, conforming to API 602 and ASME B16.34, with Stellite hard-faced disc and seat for steam service.
Where It's Used
Key industries and applications for the Angle Globe Valve
Steam drum and boiler connections
Class 300–600 WCB or WC6 angle globe valves on boiler drum steam outlet, feed water inlet, and continuous blow-down connections; 90-degree body mounts directly on drum nozzle with pipe running horizontally
Steam heating coil and reboiler inlet/outlet
angle globe valves replacing globe valve plus elbow on steam supply to vertical heating coils, reboiler steam chest inlets, and shell-and-tube heat exchanger steam connections
Process condensate drain
SS316 angle globe valves on condensate leg drain valves after steam traps; angled body allows condensate to drain freely by gravity without horizontal pipe re-routing
Boiler feed water control
Bronze or WCB angle globe valves for small boiler feed water make-up and top-up connections; quarter-turn-accessible bonnet for frequent packing adjustment in high-cycle service
HVAC fan coil and air handling unit connections
Brass or Bronze angle globe valves for hot water supply and return connections to FCU coils where the pipe changes direction at the coil header; compact installation versus separate valve plus elbow
How to Choose the Right Angle Globe Valve
Specify an angle globe valve when the piping already makes a 90-degree turn at the valve location, eliminating the need for a separate elbow and reducing flanged joints. Also preferred for boiler drum nozzle connections where the valve mounts flush on the drum and the pipe exits horizontally. If the piping is straight-through, a Z-type globe valve is more appropriate. Select Bronze body for low-pressure steam and hot water; Carbon Steel WCB for up to 425°C; alloy steel WC6/WC9 for steam above 425°C with Stellite-faced trim.
Popular Configurations
Most commonly ordered specifications for the Angle Globe Valve
Frequently Asked Questions
About Angle Globe Valve - ordering, specs, delivery & compliance
What standards does the Angle Globe Valve comply with?+
Our Angle Globe Valve complies with API 602, ASME B16.34. All products are manufactured to international standards and come with full material test reports (MTR), dimensional inspection reports, and hydrostatic test certificates on request.
What materials are available for the Angle Globe Valve?+
The Angle Globe Valve is available in Carbon Steel, SS304, SS316, Bronze. Material selection depends on your process fluid, temperature, pressure, and corrosion requirements.
What is the delivery lead time for Angle Globe Valve?+
Standard stock sizes are available for immediate dispatch from our Vadodara warehouse. Custom sizes and special materials typically have a lead time of 2–6 weeks depending on specifications. We serve customers across India within 1–7 business days and export to the Middle East, Southeast Asia, Europe, and the Americas with full export documentation.
Can I get a custom Angle Globe Valve for a specific application?+
Yes. Vajra Industrial Solutions supplies custom-engineered globe valves for specific process conditions. Submit your technical requirements - including pressure class, temperature range, fluid type, end connections, and any special trim or coating needs - via our RFQ form or WhatsApp, and our engineering team will respond within 24 hours.
What pressure ratings are available for the Angle Globe Valve?+
The Angle Globe Valve is available in pressure ratings of PN16 / PN25, Class 150 / 300. Higher-pressure classes are available for critical service applications in oil & gas, power generation, and chemical processing.
How do I request a quote for the Angle Globe Valve?+
You can request a quote by clicking the "Request Quote" button on this page, filling out our RFQ form at vajravyuh.com/rfq, emailing us at sales@vajravyuh.com, or WhatsApping us directly at +91-9979774557. Please include quantity, size, pressure class, material grade, and end-connection type for the fastest response.
Need a Quote for Angle Globe Valve?
Our technical sales team responds within 24 hours. Share your specs and get competitive pricing.
Other Globe Valves
Z-Type Globe Valve
Standard Z-body pattern globe valve for general throttling and isolation applications.
View Details →
Y-Type Globe Valve
Angled Y-body design for reduced pressure drop and high-flow applications.
View Details →
Bellows Sealed Globe Valve
Zero-leakage globe valve with stainless steel bellows stem seal for toxic, flammable, or emission-controlled services.
View Details →
Pressure Reducing Valve (PRV)
Self-regulating globe-type valve that automatically reduces inlet pressure to a safe, constant downstream set pressure.
View Details →