Valve Standard Reference
EN 1092-1
EuropeanFlanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated - Part 1: Steel Flanges
EN 1092-1 is the European standard for steel flanges, defining the PN-designated (Pressure Nominal) pressure ratings, dimensions, tolerances, materials, and marking requirements for circular flanges used on pipes, valves, fittings, and accessories.
What is EN 1092-1?
EN 1092-1 (Flanges and Their Joints - Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated - Part 1: Steel Flanges) is an industrial valve standard issued by European Committee for Standardization (CEN). Covers steel raised-face (Type 11 welding neck, Type 02 loose plate, Type 05 blind, etc.) and flat-face circular flanges in PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, and PN 400.
- Issuing Body:
- European Committee for Standardization (CEN)
- Category:
- design
Overview - EN 1092-1
EN 1092-1 is the European standard for steel flanges, defining the PN-designated (Pressure Nominal) pressure ratings, dimensions, tolerances, materials, and marking requirements for circular flanges used on pipes, valves, fittings, and accessories. It is the European counterpart to ASME B16.5 and is mandatory for flanged equipment supplied into EU markets under the Pressure Equipment Directive (PED 2014/68/EU). EN 1092-1 flanges are specified on European refinery, chemical plant, offshore, and building services projects and are essential for CE-marked valve packages destined for EU installation.
Scope
Covers steel raised-face (Type 11 welding neck, Type 02 loose plate, Type 05 blind, etc.) and flat-face circular flanges in PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, and PN 400. Applicable to carbon steel, alloy steel, and stainless steel flanges from DN 10 to DN 4000 (where applicable per class).
Vajra Industrial Solutions manufactures and supplies valves engineered to comply with EN 1092-1, each delivered with EN 1092-1 dimensional compliance marking on flange and CE Declaration of Conformity under PED 2014/68/EU (for EU supply) as standard.
Need EN 1092-1 compliant valves?
Share your requirements — we supply valves to EN 1092-1 with full certification documentation, quoted in 24 hours.
Applicable Valve Types
All flanged valve types supplied into EU markets
Gate, Globe, Ball, Butterfly, Check, Plug valves with PN-class flanged ends
Applicable Pressure Classes
Key Requirements - EN 1092-1
PN (Pressure Nominal) designations from PN 6 through PN 400 - each with defined P-T rating by material group
Flange type designations: Type 01 (plate, flat face), Type 02 (loose plate), Type 05 (blind), Type 11 (weld neck), Type 12 (hubbed slip-on), Type 13 (hubbed threaded), Type 21 (integral), Type 34 (welding boss)
Facing types: flat face (FF), raised face (RF), tongue and groove (T&G), male/female (M/F), ring joint (RJ)
Bolting and bolt circle dimensions per PN class and DN size
Material groups per EN 13480 or EN 13445 aligned with European pressure vessel codes
CE marking required for flanges used under PED 2014/68/EU Annex I
Surface finish Ra ≤ 6.3 µm for raised face seating surface
Testing Requirements - EN 1092-1
Dimensional inspection of flange face, bolt circle, and outer diameter per EN 1092-1 tables
Shell hydrostatic test per manufacturer standard or PED requirements
Material verification: PMI or 3.1 MTR for alloy and stainless steel flanges
Documentation Required for EN 1092-1 Compliance
EN 1092-1 dimensional compliance marking on flange
CE Declaration of Conformity under PED 2014/68/EU (for EU supply)
Material Test Report (MTR) per EN 10204 3.1
Dimensional inspection report
Related Standards
Browse EN 1092-1 Compliant Valves
All Standards
Connected Engineering
Need EN 1092-1 Compliant Valves?
We supply valves to EN 1092-1 with full certification documentation. Share your requirements for a 24-hour quote.